Here are the steps to install your mui board on a wall.

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/5b0f7cc2-5783-41fb-a7e8-2cc502cc7662/mui.mp4

Please note when installing

<aside> 💡 Install the mui board in a location where there is nothing blocking the Wi-Fi signal.

</aside>

<aside> 💡 Make sure to install it on a wall that can withstand the weight of the mui board such as wood or plaster.

</aside>

<aside> ⚠️ Be ware of children hanging off the mui board as it may be dangerous. Please install the hight and location of the mui board according to the age of your child.

</aside>

<aside> 🚫 Do not install the mui board in a location where it will be exposed to direct sunlight for prolonged periods of time, or in a humid location near a bathroom or kitchen.

</aside>

<aside> 🚫 Please do not use bolts other than the hex bolts provided as it may damage the unit.

</aside>

  1. Install the hex bolts included in the package into the screw holes on the back of the unit as shown in the figure below. Leave out 4-5 mm of the bolt.

    Screen Shot 2022-07-13 at 10.45.13.png

    1. Fix the mounting bracket to the wall according to the Mounting and Positioning Guide provided in the box.

    Screen Shot 2022-07-13 at 10.47.06.png

    Attach the Mounting and Positioning Guide where you want to mount the mui board. The size of the guide is the same size as the mui board and will assist in the mounting process.

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/7ca1a30c-4f5d-4dc8-aa4a-d20582072ae6/_2021-03-31_14.11.27.png

    Following the markings on the Mounting and Positioning Guide and make a hole through the paper guide in either one of the markings. Follow the marked hole in the wall to secure the bracket on the wall with a screw.

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/2d45bc66-51e1-465e-a490-55a8958e03f1/_2021-03-31_14.12.21.png

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/c896dd34-84a8-472b-8fed-974a0a22cc27/_2021-03-31_14.14.28.png

    Ensure the bracket is horizontal by using a level. Then insert the screw into the other hole to secure the bracket to the wall.

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/1065f303-4d30-49f7-8b82-fb7e9a9ec81a/_2021-03-31_14.13.21.png

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/5cedace9-8822-4d84-8826-c8f2785b4814/_2021-03-31_14.14.55.png

    Secure the braket to the wall with the remaining screws. This completes the installation of the bracket.

    <aside> ⚠️ Be sure to use appropriate screws according to the wall material.

    </aside>

    https://s3-us-west-2.amazonaws.com/secure.notion-static.com/95581c5a-86d1-45ca-a0a7-47ed01b9e548/_2021-03-31_14.15.06.png

  2. Hook the mui board onto the mounting bracket. If the mounting is unstable or does not fit properly, adjust the heights of the hex bolts.

Screen Shot 2022-07-13 at 10.48.30.png